demo scene: Rebuilt as a commercial building showcase (4.0.0). Two tenant floors render as real floor plans whose rooms tint with live zone temperature, with doors, luminaires, VAV terminals and cameras drawn as the equipment they are. The plant room now shows true equipment symbols (a sectional air handling unit, an air-cooled two-stage chiller, duty/standby and heating circulation pumps, a boiler, a pressurisation unit, an extract fan, and the electrical switchboard with its distribution boards), connected by chilled-water, heating and electrical runs, each device ringed by the colour of its highest-priority alarm and clickable through to an operable detail faceplate.
demo scene: One coupled simulation now drives the whole building. A compressed day cycle moves occupancy, outdoor temperature and solar gain; zone loads drive the terminals, the terminals drive the air handler, the air handler loads the chiller, pumps fail over between duty and standby, the boiler follows reheat demand, and the sub-boards genuinely sum to the incomer. Stopping a device visibly propagates through the plant, then recovers on its own.
ble: Added a BLE service extension that provisions Bluetooth Low Energy support on plans that include it.
Bug Fixes
demo scene: A fresh install previously provisioned its simulator and alarm annunciation in a state where neither ran, leaving readings frozen and alarm rings absent. Both now work on every install.
demo scene: Upgrading from a 3.x install: uninstall the extension and install it again. Reinstalling in place leaves the old version's retired graphics behind.
⚠️ Breaking Changes
The internal Capture Site demo extension has been removed from the catalog. The Demo Scene extension is the supported live demo. Nodes that still have Capture Site installed keep working and can uninstall it normally.